MaxLoc Dock/Pier Supports
MaxLoc Dock/ Pier Supports
This is our primary dock support- built from a 2"x4" style aluminum extrusion and a solid anodized-billet aluminum block clamp, the MaxLoc crossmember has revolutionized the seasonal dock industry! Lightweight & strong (MUCH more stable than traditional 'clamshell' style pole clamps), incredibly easy to install and adjust with only 1 person (watch the video!), these are a must if you are considering a new dock or want to improve an existing dock! We offer a wide variety of possibilities for platforms and unique dock layouts and designs-just send us a sketch of what you want and we'll design a custom solution for you!
At barely more than the cost of traditional post and clamp dock hardware that stretches and breaks within a few years, this system will pay for the price difference by itself over time versus replacing cross-arm clamps every few years! They are great replacements of your current shaky crossmembers to beef up any existing standard witdth docks (35.25" or 47.25" width, which is 80% of the market, just be sure to measure yours!) which you may already own and to get the ease of installation and added strength without replacing your entire dock or poles.
You will need one (3' or 4') MaxLoc support per 'runway' dock section- the docks share the support at each end where they join together.
Just use a 5/16" Allen head socket on your cordless impact gun or ratchet or common L- shaped allen wrench to adjust the height with the two bolts pictured above and you're done!! Many people can adjust the dock by themselves, 1 hand holding dock at desired height, the other hand loosens and tightens the dock as necessary.
3' MaxLoc Fixed-Width Crossmember (Fits Any Standard 35.25" Width Dock)- $97.00 plus 6% tax
4' MaxLoc Fixed-Width Crossmember (Fits Any Standard 47.25" Width Dock)- $103.00 plus 6% tax
3' - 5' Adjustable MaxLoc Crossmember- $133.00 plus 6% tax
SUPERIOR HD Beam Platform Crossmembers
SUPERIOR HD Beam- Platform Deck Crossmembers
SUPERIOR HD Beams are stronger than MaxLoc platform supports, a fraction of the weight and easier to attach the T/L platform beams to the MaxLoc support on the runway of the dock (3' and 4' MaxLocs are still the easiest to adjust and strongest runway supports available, so we still prefer those on the main part of the dock).
If you are doing a parallel platform (all dock sections facing same direction as the runway), you will want 3 of the Standard SUPERIOR HD Beams for the first 10' of your platform, in either 8' or 12' depending on your desired platform layout. Most of our competiton just quotes 2 supports for their platform decks for the sake of being more competitive- we prefer to do it the right way and add the third support in the center (see photos above) to avoid pinched feet as the sections flex, and to provide additional support for when you accidentally get too many friends on your new dock!
For a 10' long 'L' platform section (turns perpendicular to the runway, whether 8' or 12' width) you will need 1 T&L SUPERIOR HD Beam and 2 Standard SUPERIOR HD Beams of the same width, then 2 more of the Standard SUPERIOR HD Beams for every additional 10' of platform that extends out. Having the third support in the middle of the platform prevents pinching your feet between the dock sections if they flex indepently and also provides more support and peace-of-mind for when you accidentally end up with too many friends out enjoying your dock platform.
3' SUPERIOR HD Beam Crossmember- $126.00 plus tax
3' SUPERIOR HD Beam Crossmember T&L (To MaxLoc Runway Support)- $134.00 plus tax
4' SUPERIOR HD Beam Crossmember- $132.00 plus tax
4' SUPERIOR HD Beam Crossmember T&L (To MaxLoc Runway Support)- $140.00 plus tax
8' SUPERIOR HD Beam Crossmember- $177.00 plus tax
8' SUPERIOR HD Beam Crossmember T&L (To MaxLoc Runway Support)- $188.00 plus tax
12' SUPERIOR HD Beam Crossmember- $227.00 plus tax
12' SUPERIOR HD Beam Crossmember T&L (To MaxLoc Runway Support)- $247.00 plus tax
SUPERIOR HD UNDERDOCK SUPPORTS (UDS)
Heavy Duty Underdock Supports feature adjustable height and width, which makes them ideal for our 4'x10' SUPERIOR SureStep Composite dock sections (which are too wide for MaxLoc or SUPERIOR HD Beam supports). These are also the best option if you want a clean looking, incredibly sturdy dock without seeing any poles above the dock!
With the welded triangle tubular gusset framework in the corners, these are by far the strongest dock support option that we offer!
Price is for upper-frame only and does NOT include poles or footplates (sold separately, a la carte style based on your dock height needs- tall UDS stands give roughly 14" of adjustment, the 'shorty' stand gives roughly 6" of adjustment.Therefore, plan to select your poles (priced individually, below) closest to your actual desired height, then add the UDS which adds about 4" of height plus adjustability. If you end up too tall, you can either get the next 1' increment smaller pole and use some of the adjustability of the UDS, or simply cut your poles off at custom heights to get the best possible fit for your exact location.
Prices shown below are for upper-frame support only and does NOT include poles or footplate! Scroll down the page to add poles and footplates a la carte based on your needs!
3'-4' Adjustable Width Superior HD Underdock Stand (12"+ Tall)-$127 plus 6% tax
3'-4' Adjustable Width Superior HD Underdock Stand (24"+ Tall)-$140plus 6% tax
8' Adj.-Width Superior HD Underdock Stand (24"+ Tall)-$160 plus 6% tax
12' Adj.- Width Superior HD Underdock Stand (24"+ Tall, Requires Middle Leg & Footplate)-$266
plus 6% tax
Our aluminum dock poles are industry-standard 2" outer diameter (O.D.) and 1.84" inner diameter (I.D.) which will fit standard 1.75" augers and will never rust like galvanized steel poles, giving your dock a clean look and are a fraction of the weight of your old steel poles!
Our poles in lengths 7' and longer are a 50% thicker, Heavy Duty wall stock (.120" versus standard .080") to strengthen the dock in deep-water and deep-muck situations, but retain their 2" O.D. size (the extra thickness is to the inside) to work with all standard size dock components- supports, footplates and augers!
2' Aluminum Pole $12.00 plus 6% tax
3' Aluminum Pole $16.00 plus 6% tax
4' Aluminum Pole $20.00 plus 6% tax
5' Aluminum Pole $24.00 plus 6% tax
6' Aluminum Pole $28.00 plus 6% tax
7' HD Aluminum Pole $33.00 plus 6% tax
8' HD Aluminum Pole $36.00 plus 6% tax
9' HD Aluminum Pole $42.00 plus 6% tax
10' HD Aluminum Pole $49.00 plus 6% tax
12' HD Aluminum Pole $57.00 plus 6% tax
16' HD Aluminum Pole $75.00 plus 6% tax
H.D. 12" x 12" MUD PLATE
If you have a little muck or silt these will help, or add extra stability to your dock even on sandy bottoms! Use these on dock platforms and/or the last 2 sections of a straight runway dock, regardless of lake bed for extra support- think of it like a snowshoe, the larger the more stability you will get, whether it is muddy or sandy, you will still benefit from it! These work well in up to shin deep muck.
Corners are turned down toprotect your feet from sharp corners and to help grip the lake bed.
12 in. x 12 in. with 3/4" stainless bolt with brass nut.
Accepts up to 2" dia.poles. Centers are open so poles can pass through 4-6" for extra bite.
HEAVY DUTY 12" x 12" MUD PLATE- $32.00 plus 6% tax
HEAVY DUTY 8" X 8" BOTTOM PLATE
For 2" diameter poles, our HD aluminum foot plates offer several advantages over the competition's: 3/4" stainless set bolt with brass nut (versus smaller, galvanized 9/16"), taller collar, and most importantly, turned down edges to prevent skidding and to protect your bare feet from sharp corners!
HEAVY DUTY 8"X8" BOTTOM PLATE- $16.00 plus 6% tax
SUPERIOR COMPOSITE AUGERS
Finally, an auger that doesn't break in half like the cast aluminum augers, or add senseless weight to an install!
Use these when in extreme muck and you need to grip the bottom below it, or most importantly to add extra security to your lightweight aluminum dock if you plan to moor a boat directly to the dock to prevent the dock from being flipped over with your boat yanking on it! These are also what we use for our shore-starter kit.
Believe it or not, we have had people break multiple standard cast-aluminum augers in the same spot, then tried these despite being skeptical about durability and they had no issues driving it into the same hole that kept breaking the aluminum augers! We have 'football spiked' these and cast aluminum augers into
These have a tapered shank to allow them to fit common 2" O.D. dock poles with a standard-wall thickness of 0.090" and also heavy-duty 2" O.D. pipe with 0.120" wall thickness. Comes with galvanized bolt and nut.
SUPERIOR Composite Augers- $14.00 plus 6% tax
If you want a functional and good looking way to start a dock off on land without the added cost of a stand or an H assembly, these are what you want. Adds rigidity to your dock without having to bolt to a seawall or deck.
The kit contains 2 aluminum brackets, 2 augers, and two 3' poles. Dock sections already have one hole so all you do is drill one more and bolt them on. Now, you will be able to adjust the dock starting height as well as add rigidity to the entire dock.
Most customers leave the poles augered-in during the off season so in the Spring their dock can go back in the same exact spot which means fewer adjustments.
Shore Starter Kit- $107.00 plus 6% tax
Optional-Anodized Aluminum End Cap-
$45 plus 6% tax
Aluminum Dock End Caps
End caps provide both form and function by providing a clean, finished look to your dock which matches the side rails (stringers) and most importantly to protect you from sharp framework edges underneath the dock! A fantastic option to enclose platform ends to really set the dock apart!
This is especially important when on the shore end of a dock which has a step up from a seawall or shore starter kit, preventing you from skinning the top of your foot if you accidentally kick underneath the dock itself while stepping up if the dock is exposed above ground.
Please note: these are designed to fit on our own dock using inserts which pop into the underside framework of your dock, depending on the size and spacing of your framework, they may or may not work if you are retro-fitting them to an existing dock purchased elsewhere, or even 5+ year old generations of our own dock.
Standard 3' Anodized Aluminum End Cap- $43.00 plus 6% tax each
Standard 4' Anodized Aluminum End Cap- $45.00 plus 6% tax each
36" Vertical Dock Bumpers
Our vertical bumpers slip over your standard 2" O.D.dock poles and are quickly secured and easily adjusted using a single 3/4" stainless-steel set bolt. The aluminum bumper frame extends out to provide clearance for traditional dock support clamps, as well as our Max Loc supports.
These provide far better protection and looks than the traditional slip-on torpedo style bumpers that are difficult to install and remove and rot away after a few years. Also, the torpedo bumpers do not provide proper protection over our MaxLoc supports.
Shown Left to Right:
Extended (L Platforms) - Standard - UDS Support Type
White Poly/ Aluminum 36" Vertical Dock Bumper
$56 plus 6% tax each
Extended Arm (To Reach Around 'L' Platform Corner) White Poly/ Aluminum 36" Vertical Dock Bumper
$78 plus 6% tax each
UDS Under Dock Support Specific- White Poly/ Aluminum 36" Vertical Dock Bumper (P/N UDS36BMP)
$70 plus 6% tax each
Mooring-Pole Side-Support Brackets
These brackets allow you to skip the hassle of auguring your entire dock to secure it for direct boat tie-up. Simply install your dock using our 8"x8" HD traditional footplates or 12"x12" XL Mud Plates for a quick and easy installation and leveling, without the misery of having to hold the dock up while your buddy augers the poles and trying to get the dock to auger in straight.
Once your dock is perfectly level and straight with simple installation on footplates, then add Pole Support Side Brackets wherever necessary to add augured mooring poles to 'anchor' your lightweight aluminum dock to the lake bed, allowing safer boat tie-up for the dock itself and your precious boat. This method of installation is more steps overall, but FAR easier than auguring the entire dock!
Use at least 4 Mooring Side-Support Brackets per boat on the dock, even more for windy areas or large boats. The minimum number of augured poles per boat should be 6- 4 augured poles holding the dock in place, 2 of which the boat will attach to, and 2 free-standing augured poles on the opposite side of the boat, creating a 'spider web' where the boat does not touch the dock or the poles when it is properly spaced with Anchor Shock Bungees (below).
Pole-Support Side-Brackets- $24.00 each plus 6% tax
(Does not include 2" dock pole or auger)
POLE-MOUNTED LED SOLAR MARINE LIGHTS
Not to be confused with the cheap box-store solar lights, these will outlast and outperform just about everything else on the market! Takes one rechargeable AA battery each with 1-3 years battery life expectancy. Lights up for up to 18 hours on a full 10 hour sunny day charge. You can order different color LED bulb replacements online for a distinct look on your shoreline to help friends find you!
Fits standard 2" O.D. dock poles & includes reducers for oddball smaller diameter dock poles, fence posts, etc.
LakeLite Solar Lights- $55.00 plus tax for a 2 pack
Adds additional stability to dock in deep water or extreme muck where longer poles are necessary.
Clamps at each end to your 2" standard dock poles and is the easiest improvement for a shaky dock/pier system.
Diagonal Brace for 3' Wide Dock
$47.00 plus 6% tax
Diagonal Brace for 4' Wide Dock
$52.00 plus 6% tax
T&L/ Seawall Brackets
Aluminum brackets are for connecting dock
sections when "T" ing off or making an "L"
90 degree turn off the side of a dock section.
Just drill matching holes through the bracket
and a dock section side stringer and then
bolt together. These are what you need for
starting a dock off a steel or wood seawall which is perpendicular to the direction of the dock.
3' T & L Bracket $62.00 plus 6% tax
4' T & L Bracket $68.00 plus 6% tax
Dori Poles- Bird Deterrent & Dock Styling
Dori Poles- The Ultimate Bird Deterrent!
Dori Pole flags offer a great way to keep your dock clean and free of birds and their droppings! Not to mention, they are a fantastic way to set your dock apart from the rest, making it easy for family and friends to find your house from the water! Also, show your team pride with multi-colored flags available in a wide variety of color choices!
Price includes a 19' telescoping fiberglass pole that fits right inside standard 2" O.D. dock pipes!
Single Color Penant- $169.00 plus 6% tax
Dual (Split) Color Penant- $179.00 plus 6% tax
Red, White and Blue Patriotic Penant- $189.00 plus 6% tax
Anchor Shock- Mooring Shock Absorber Lines
Anchor Shock- Mooring Shock Absorber Lines
Save your dock (especially, lightweight aluminum dock) from the additional stress of being yanked around in the wind by your boat. 24" long bungees with a loop on one end and stainless-steel carabiner-style hook opposite for front pontoon eyelets or boat cleats. Perfect for a safe and secure four-point tie-up of your pontoon!
Create a 'spider web' with the bungees slightly tensioned between four poles which reduces harmful yanking on the dock and boat as wind and waves come through. It also keeps the boat centered and preventing it from hitting the dock or the poles when properly spaced!
These are also perfect for sand-bar party tie-up between boats! Keeps boats tight together with standard boat fenders inbetween, preventing the boats from violently jerking around or slamming together like with standard rope, and no knots needed! Simply loop through itself on your cleat, then clip onto your buddie's boat cleat and let the fun begin!
These were tested at an incredible 500,000 cycles! For boats up to 3,500 lbs, and NOT meant to be the primary line. We recommend to tie a secondary rope line just short of the fully-extended bungee length to prevent bungee from snapping in sustained high winds. Tie the rope through the caribiner so you only have to hook 1 time in each corner.
Anchor Shock 24" Mooring Lines- $23.00 each plus 6% tax
Anchor Shock 40" Mooring Lines- $34.00 each plus 6% tax
STAMPED ALUMINUM DOCK HARDWARE
For those who wish to match their replacement or add-on harware to their existing traditional 'old school' hardware. Stringer Brackets are extruded aluminum and Cross-Arm Clamps are stamped aluminum- not to be confused with the imported cast aluminum hardware that is brittle and has imperfections that can often cause breaks.
If you are designing a brand-new dock system, forget you ever saw this type of clamp and check out our MaxLoc or UDS supports which are far stronger!
TRADITIONAL DOCK HARDWARE
Stringer Bracket $17.00 plus 6% tax
Cross Arm Clamp $16.00 plus 6% tax
Diagonal Clamp- $22.00 plus 6% tax
Parallel Bracket Set $14.00 plus 6% tax
3' Aluminum Cross Arm $20.00 plus 6% tax
3'3'' Aluminum Cross Arm $22.00 plus 6% tax
4' Aluminum Cross Arm $24.00 plus 6% tax
4'3'' Aluminum Cross Arm $26.00 plus 6% tax
Seawall 4' Pivot Tube Starter Bracket
Seawall 4' Pivot Tube
Perfect for ramping up or down from a beach start or a seawall that is either angled vertically or is higher or lower than the desired dock height. This allows a transition angle between sections that is not possible with any traditional dock support.
Comes with tabs going both directions to connect two docks on a beach start. For seawalls, simply remove the tabs from one direction (pictured above).
Seawall 4' Pivot Tube Starter Bracket- $98.00 plus 6% tax
***All prices, available inventory, and product lines are subject to change without notice!***
Lifts Ladders And Docks.Com:
A Division of BlueScape, Inc.
For Quotes or Service:
Sales and Service
Text or Call:
Click below for a quick quote:
Text or Call:
Click below for a quick quote:
Northern Michigan- Sales
Click below for a quick quote:
WAREHOUSE AND SHOWROOM
11811 S. Shaver Road
Schoolcraft, Michigan 49087
Just South of Kalamazoo, MI
Winter Hours (December-March):
Tuesday-Friday 12:30 pm - 5:30 pm
Saturdays By Appointment!
Just Text Or Call For Availability
Cash or Checks
All Major Credit or Debit Cards with 3% Fee Added To Total Bill